Pluto Lite Projector Cage 355(w) x 310(d) x 115(h)
This new, innovative range of lightweight, secure projector cages
will hold most projectors, whilst still retaining full functionality.
Projectors come in a variety of shapes and sizes and the Pluto Lite
range offers a choice of 4 different models that will accommodate the
majority of projectors available in the market today.
Simple to fit
The Pluto Lite cage comes
complete with a removable mounting plate. Projectors have a variety of
hole sizes and fixing points, but the removable mounting plate will
allow the majority of projectors to be fitted, using the spacers and
fixings provided. Once the projector is fitted, the mounting plate slots
simply into place inside the cage. The projector can be easily removed
with the mounting plate when required, and re-installed without having
to re-set the projector position.
Adjusting the projected image,
particularly on to an interactive white board, is also catered for using
the Top-Tec ball swivel mount in conjunction with the unique Micro
Adjustment Thumbscrews on the top of the cage. The innovative swivel
plate is cleverly angled and this allows up to 45° tilt, far in excess
of the industry standard. Combined with 360° rotation, the Pluto Lite
swivel mount allows you to adjust your cage to the required position.
Once the ball mount is tightened, the four Micro Adjustment Thumbscrews
allow fine-tuning for perfect alignment. The swivel mount is designed to
fit a 50mm column as standard, although Top-Tec supplies adaptors to
accommodate other column systems.
Security and Flexibility
The Pluto Lite is
designed to cater for a variety of lens, cabling and access positions
that are found on projectors by having different cut-outs on each side.
The locking bar secures both the projector and the removable mounting
plate into position and is fitted with drill resistant push button
locks. The locking bar is reversible and there are three positions on
the top of the cage and two on the base that accept a locking bar, thus
providing a number of fixing options. The two positions on the base of
the cage allow the cage to be fitted close to the ceiling where there
would be insufficient room to remove the locking bar from the top.
The cage is well ventilated and there are cable management holes
incorporated on the top of the cage. Additional security options are
offered by a fixing hole into which a 10mm Security Cable can be
inserted. This can then be secured to the wall or ceiling.